EA150A

Automatic Voltage Regulator (AVR)

Specifications

Sensing Input	Voltage 100 to 500 Vac 1 phase 2 wire \| Frequency 50/60 Hz selectable
Power Input	Voltage 170 to 265 Vac 1 phase 2 wire \| Frequency 50/60 Hz selectable
Output (at 220 Vac input)	Voltage \| Half-wave Max. 90 Vdc \| Full-wave Max. 180 Vdc \| Current Continuous 150A Intermittent 200A for 10 seconds \| Resistance \| Half-wave Min. 0.9 ohm \| Full-wave Min. 1.8 ohms
External Voltage Adjustment	+/-6%
Voltage Regulation	Less than +/-1% (with 4% engine governing)
Build Up Voltage	Residual voltage at AVR terminal greater than 5Vac @ 25Hz
Droop Adjustment	Droop current compensation input 5A 5VA +/-7% @ PF = +/-0.5 (Droop adjusted)
Analogue Input	Analog voltage input connect to an external DC signal +/-5Vdc 7% adjustable (TRIM adjusted)
Under Frequency Protection \| (Factory Knee Point Setting)	50 Hz system presets knee point at 45 Hz \| 60 Hz system presets knee point at 55 Hz
Battery Input (24V)	Power input for the flash and alarm

Dimensions	630.0 (L) x 400.0 (W) x 285.0 (H) mm
Weight	28 Kg +/-2%