HMC6000A/HMC6000A 2 diesel engine controller integrates digitization, intelligentization and network technology which are used for genset automation and monitor control system of single unit to achieve automatic start/stop, data measure, alarm protection and “three remote” (remote control, remote measuring and remote communication). It fit with 132*64 liquid display, optional Chinese/English languages interface, and it is reliable and easy to use.

The powerful 32-bit ARM processor contained within the module allows for precision parameters measuring, fixed value adjustment, time setting and set value adjusting and etc..Majority parameters can be configured from front panel and can be configured by communication interface via PC. Due to its compact structure, simple connections and high reliability, HMC6000AHMC6000A/HMC6000A 2  can be widely used in marine emergency engines, main propulsion engines, main generator engines and pumping engines.

HMC6000A/HMC6000A 2  diesel engine controller has an expansion CANBUS port that will be connected to a remote control module or expansion digital output module and security module.

PERFORMANCE AND CHARACTERISTICS

1. 32-bit ARM micro-processor, 132*64 liquid display, optional Chinese/English interface, push-button operation;

2. Connect with remote monitoring module via CANBUS (expand) port to realize remote monitoring and remote start/stop control;

3. RPU560A security module can be expanded via CANBUS (expand) port;

4. Dozens of engine, which is compatible with J1939 protocol, can be monitored via CANBUS(ECU) port;

5. RS485 communication ports enable data communication as well as remote control, remote measurement and remote communication;

6. Control and protection: remote/local start and stop diesel engine, alarm protection;

7. Override mode, in which only overspeed and manual emergency shutdown can stop the engine;

8. Parameter setting: parameters can be modified by users and stored into internal FLASH memory and cannot be lost even in case of power outage;

9. Six sensor inputs for pressure, temperature, fuel level or other resistor type sensors; pressure sensor and Flexible sensor1~3 also can be set to (4~20)mA input and (0~5)V input;

10. Real-time clock, engine total run-time accumulation, display the total start times;

11. Built-in speed detection, which can accurately judge crank disconnect status, rated running and overspeed status. 

12. 99 event logs can be saved circularly and can be inquired on the spot;

13. Digital regulation of all parameters – instead of analog regulation using conventional potentiometer – and, therefore, higher reliability and stability;

14. Modular design, self extinguishing 50%ABS+50%PC plastic enclosure and embedded installation way; small size and compact structure with easy mounting

Technical Parameters

DisplayLCD(132*64)Operation PanelSilicon RubberLanguageChinese & EnglishDigital Input11Analogue Input6Relay Output8Transistor Output9Current Sensor4 (resistance and current can convertible)Resistance Sensor6 (4 for resistance and current can convertible)LA16 Module Extension●RPU560A Module Extension●DOUT16B Module Extension●HMC6000RM Remote Module●COM. InterfaceRS485/LINKCANBUS Port Extension●CANBUS(J1939)●RTC & Event Log●DC SupplyDC(8～35)VCase Dimensions(mm)197*152*47(L*W*H)Panel Cutout(mm)186*141Operating Temp.(-25～+70)℃

Data Download

HMC6000RM controller integrates digitization, intelligentization and network technology which is used for remote monitoring system of single unit to achieve automatic start/stop, data measure, alarm protection and record checking. It fits with 132*64 liquid display, optional Chinese/English languages interface, and it is reliable and easy to use. 

PERFORMANCE AND CHARACTERISTICS

1. 32-bit ARM micro-processor, 132*64 liquid display, optional Chinese/English interface, push-button operation;

2. Connect to HMC6000A/HMC6000A 2 module via CANBUS port to achieve remote start/stop control;

3. With monitor mode which can achieve check data only but not control the engine.

4. Modular design, self extinguishing ABS plastic enclosure and embedded installation way; small size and compact structure with easy mounting.

Technical Parameters

DisplayLCD(132*64)Operation PanelSilicon RubberLanguageChinese & EnglishCANBUS Port Extension●Remote CANBUS Port●DC SupplyDC(8～35)VCase Dimensions(mm)197*152*47Panel Cutout(mm)186*141Operating Temp.(-25~+70)℃

Data Download

HMC9000A/HMC9000S Diesel Engine Controller integrates digitization, intelligentization and network technologies together, and is applicable for one-set diesel engine automation and monitoring system to achieve remote control on the engine, local automatic start/stop, data measurement, alarm protection and “three remotes” (remote control, remote measuring and remote communication). It employs TFT-LCD display screen with optional Chinese/English languages interface. It is simple and steady to operate. 

HMC9000A/HMC9000S Diesel Engine Controller employs 32-bit ARM processor and can achieve precise measuring for multiple parameters, fixed value adjustment, time setting, and integer value adjustment etc. They can be configured and monitored from the front panel or by communication interface on PC. It has compact structure, simple wire connection and high reliability, which can be used for all kinds of diesel engine automation system. It is widely used in marine emergency genset, main propulsion engines, main generator engines and pump engines. 

HMC9000A/HMC9000S Diesel Engine Controller has SAE J1939 Interface, which can communicate with electrical injection engines with J1939 interface. Speed, water temperature, fuel temperature and oil pressure etc. parameters can be displayed and read on the LCD directly through communication interface. Users are needless to install sensors and it reduces complex wires. This interface can also do all kinds of module expansion. Simple wiring ensures fast transport speed and high reliability. 

HMC9000A/HMC9000S Diesel Engine Controller has remote-distance monitoring interface, which is used for remote monitoring and can perform start/stop and other functions remotely. 

PERFORMANCE AND CHARACTERISTICS

1. Core of 32-bit ARM micro-processor, 4.3-inch LCD display with backlight, optional Chinese/English language, tuch-button operation.

2. Ability of controlling and communicating with dozens of electrical injection engines with J1939 interface. It can also connect with digital output module, security module, electric quantity protection module, analog input module etc. for users’ convenience and needs. 

3. Realizing the function of remote-distance monitoring the engine via REMOTE (CANBUS) interface. Under the remote monitoring mode, other buttons on the controller do not work except Stop button. It is safe and convenient. 

4. Equipped with RS485 and USB communication interfaces. It can realize the functions of data communication and “three-remotes” by installing monitoring software on PC and MODBUS protocol. 

5. Protection control function: it can realize the Start/Stop, Alarm protection function under remote or local control mode. 

6. Override mode function: under this mode only over speed shutdown and emergency shutdown can stop the engine.

7. Parameter setting function: it allows users to change and set the parameters and meanwhile they shall be stored in the FLASH memorizer so that they will not disappear in case of power outage.

8. Four 4-20mA inputs: it can put in pressure or liquid level messages. 

9. Four resistance sensor inputs: it can put in pressure signal, PT100 temperature signal, liquid level signal or other signals.  

10. Two K-type thermocouple inputs: it can put in exhaust temperature signals.

11. Real-time calendar, real-time clock, and total running time accumulation function. 

12. Displaying the total start accumulation times.

13. Built-in speed detection equipment: it can precisely judge successful start status, normal running status and over speed status.

14. Circularly 99 event logs preservation function: users can search the documentation on the spot. 

15. Double power supply monitoring and transferring function: power supply switchover can be performed through external interface by setting switchover voltage value.

16. All parameters are done by digitalized modification: it gets rid of the analog adjustment methods of ordinary potentiometers and improves the reliability and stability of the whole genset.

17. Break wire detection function for some Input/output ports.

18. Modular structure design, and embedded installation way: Structure compact; size small; and operation easy and convenient.

Technical Parameters

Display4.3 inches TFT-LCD (480*272)Operation PanelSilicon RubberLanguageChinese & EnglishDigital Input18Analogue Input8Relay Output8Transistor Output8Current Sensor4Resistance Sensor4HRM3300 Module Extension●LA16 Module Extension●RPU560A Module Extension●AIN16 Module Extension●AIN16-PT Module Extension●AIN16-C Module Extension●AIN16-K Module Extension●AIN16-M01 Module Extension●DIN16 Module Extension●DOUT16B Module Extension●COM. InterfaceRS485/USBCANBUS Port Extension●Remote CANBUS Port●CANBUS(J1939)●RTC & Event Log●GOV●DC SupplyDC(18-35)VCase Dimensions(mm)266*182*45Panel Cutout(mm)214*160Operating Temp.(-25~+70)℃

Data Download

HRM3300 remote control module is a remote control module for HMC9000 controller. With the help of CANBUS it can carry out remote start/stop of the marine genset, data measurement, alarm display and other functions. HRM3300 is designed for single generator remote control systems. The module has monitor mode, in which it only monitors, but does not control the genset. Up to 16 HRM3300 modules can be connected to one HMC9000 controller.

The module contains 32-bit ARM microprocessor; it is fitted with a large 480*272 resolution TFT-LCD monitor, selectable English/Chinese interface. The home page of the monitor is instrument display. The brightness of the LCD monitor and LED light indicators can be adjusted, which enables operation in different conditions. The module is designed for panel mounting, it has simple structure, simple connections and can be widely used in various situations.

Specification

1. Operating Voltage：DC18.0V to 35.0V, continuous power supply.

2. CANBUS Baud rate：125kbps

3. Max. transmission distance：500m

4. LCD/LED Brightness：11 Stage adjustable

5. Total consumption：≤2W

6. Overall dimension：266mm x 182mm x 45mm

7. Panel cutout：214mm x 160mm

8. Shell material：Self extinguishing  ABS+PC

9. Button material：Silicon rubber

10. Working Conditions：Temperature：(-25~+70)°C　　Humidity：(20~93)%RH

11. Storage Condition：Temperature：(-25~+70)°C

12. Protection Level：IP55 Gasket

13. Weight：0.75kg

Technical Parameters

Display4.3 inches TFT-LCD(480*272)Operation PanelSilicon RubberLanguageChinese & EnglishK-type thermocouple input2AIN8 Module Extension●Remote CANBUS Port●DC SupplyDC(8～35)VCase Dimensions(mm)266*182*45Panel Cutout(mm)214*160Operating Temp.(-25~+70)℃

Data Download